Main (406) 587-5417 ● Toll Free (877) 796-7790

Our service department is able to offer air compressor preventative maintenance agreements.  We regularly repair and service all types of compressors. 

www.compair.com

The service agreement covers the following:

1. INSPECT COMPRESSOR FOUNDATION
2. CHECK AND RECORD COOLANT SEPARATOR PRESSURE DROP
3. INSPECTION & REPLACEMENT OF AIR INTAKE FILTER ELEMENT 
4. CHECK HIGH AIR TEMPERATURE SWITCH
5. INSPECT FOR OIL AND OR AIR LEAKS
6. CHECK PERFORMANCE OF WATER-COOLED COOLERS
7. GREASE MOTOR BEARINGS AS NECESSARY
8. CHECK AND RE-TORQUE AS NECESSARY ALL BOLTS AND SCREWS
9. TAKE ONE OIL SAMPLE
10. CHECK CONDITION OF ALL HOSES
11. CHECK CONDITION OF DRIVE BELTS
12. CHECK AND RECORD BELT TENSION RANGE
13. CHECK SHEAVE ALIGNMENT
14. CHECK COOLANT LEVEL
15. CHANGE COOLANT AS NECESSARY
16. CHANGE COOLANT FILTER ELEMENT AS REQUIRED
17. CLEAN EXTERIOR OF COMPRESSOR
18. CLEAN SEPARATOR SCAVENGE SCREEN AND ORIFICE
19. CHECK DRIVE MOTOR AND RECORD VOLTAGE (LOADED AND UNLOADED)
20. CHECK AND RECORD DRIVE MOTOR AMPS (LOADED AND UNLOADED)
21. SONIC TEST OF MOTOR AND COMPRESSOR AIREND BEARINGS
22. CHECK AND RECORD BEARING TEMPERATURE (DRIVE MOTOR AND AIREND)
23. CHECK OPERATION OF AFTER-COOLER AND RECORD TEMPERATURES
24. INSPECT ALL SAFETY CONTROLS, CONDENSATE DRAIN VALVES, CONTROL
25. INSPECT AND PROVIDE OPERATION TESTS OF ALL SAFETY PRESSURE RELIEF VALVES
26. SUBMIT A SIGNED AND DATED INSPECTION REPORT TO CUSTOMER

[ Home ] [ Up ]

Midwest Welding & Machine ● 2320 N. 7^TH Ave Bozeman, MT 59715 ● (406) 587-5417 / (877) 796-7790

Send mail to gary@midwest-welding.com with questions or comments about this web site.
Copyright © 2008 Midwest Welding & Machine, Inc.
Last modified: 07/13/10